Car Alarm Accessories
Here are some Great Vehicle Security Accessories that can be added to most any car alarm or auto security/remote start system! We carry most of these in stock and can install these auto security accessory products anytime as an add-on to your car security purchase.
| Control your car security through your smartphone. Get text or email alerts if your vehicle is tampered with. This feature requires a car security system that is compatible with the smartphone interface that is necessary and is installed on your vehicle.
|Track your vehicle. Be able to recover it if it is stolen. Know where it is at any time. Get various alerts as to its driving behavior: speed alerts, location alerts. Vehicle may be tracked on your phone or on a computer. Tracking device may be combined with security system and remote start.
|Microwave Radar Sensor Or Proximity Sensor
is used in auto security systems to detect movement within a space, like movement in the vehicle’s interior. Common uses are for covering the inside of a motor home, pickup truck bed that is covered by a comper shell, interior of a car, and interior of a convertible – even with the top down! Any significant movement within the space trips the auto alarm.
All our car alarm systems come with a siren. Sometimes an additional car alarm siren can be added to increase attention or even to add noise to the inside of a motor home or car when the auto alarm sounds.
|Scanning LED’s come in a vaiety of sizes and colors. They are series of about 8 LED’s. Bright lights that move back and forth in different patterns that are controlled by you by pressing a button on the light. The scanning LED is a great deterent. It will warn people away from your vehicle, letting them know that you have anauto alarm and that it is armed. This can save you from a broken window! The intruders will often decide to victimize a different vehicle, one without a car alarm.
||Piezo Mini Siren
Great for adding extra piercing sound inside the vehicle to make it unwelcome for anyone to enter while the car alarm is sounding. Use two piezo sirens at a time for maximum effectiveness. This auto alarm siren is rated at 115db, draws 255ma, for interior use, no relay necessary.
|Horn Honk Relay
This device enables the car alarm to simultaneously honk the car’s horn in blasts while the alarm siren is also wailing continually when the car alarm goes off. This creates tremendous noise and attracts maximum attention!This relay also has a pulse timer circuit that allows for pulsing the horn while the siren is wailing. You can choose to prevent the horn from honking during arming and disarming. In this way you get just the arming chirps from the siren instead of both the siren and horn honk together. The horn honks only when the alarm is tripped and the siren is sounding.
|Battery Backup Siren
The battery Backup 129db siren is a great security addition to any auto alarm. Not only do you get an extra noise maker, but it contains it’s own backup battery that is automatically charged by the car. No need to replace batteries. With it’s backup battery, whenever the siren detects a voltage drop, the siren will start to sound on its own. If someone should disconnect the car battery, the siren will sound immediately. To prevent the siren from sounding or to turn it off once it has started, it comes with two special alarm keys that fit into a lock on its side. Turning the key off will turn the siren off.
Questions on these Auto Alarm Accessories? Call us at 816-356-8700!
|Power Door Lock Motor or Actuator
Sometimes when installing an auto alram or alarm/remote start, the car may not have full power door locks or a door lock motor may be bad. If so, we can usually add or replace the door lock motor to enable the door to be activated elecronically as part of the keyless entry system or as part of the car alarm/remote start system. Some foreign cars like Mitsubishi do not have full power door locks. You must mechanically unlock the driver’s door and then the other doors will unlock electronically. In this case a door lock actuator must be added to the driver’s door to convert this door to power unlock. Without the motor the driver’s door would continue to unlock only mechanically and would not respond to the keyless entry command of the car alarm or remote start.
Air Horns represent one of the loudest noise makers you can add to the car security system. When we install air horns on a vehicle, we pair it with the horn honk module to pulse the air horns so they will sound in blasts. We recommend they be used along with the auto alarm’s siren so that there are two noise makers sounding simultaneously. The air horns can also be installed separately for use by themselves.
|Impact Sensor or Shock Sensor
The impact sensor is at the heart of the protection the car alarm provides. The shock sensor detects any attempt at brute force entry into the vehicle. Any impact on the doors, windows, or trunk is detected. If someone tries to punch out a door lock or strong arm a lock or hatch, or if someone tries to damage some wheel locks so they can steal those expensive chrome wheels, the impact sensor will detect the vibrations and immediately sound the car alarm. All auto alarms and car alarm/remote start combinations we sell and install have an impact sensor as part of the security system. A second impact sensor can be added to the rear of large vehicles to increase coverage for better results. Also the impact sensor can be added to tool boxes on work trucks to protect tools. When the sensor detects a break-in impact, the auto alarm will sound. In this way the car security system gives more complete protection to your expensive work tools on your truck.
|Digital Tilt Sensor
This digital tilt sensor is designed to work with most aftermarket alarm systems. It helps detect when a vehicle is being raised in an attempt to either remove the vehicles wheels or to tow the vehicle. This tilt / motion sensor has a 1 to 3 degree tilt sensitivity, and will reset the vehicle’s initial angles of vertical and horizontal inclination each time the vehicle is parked.This ensures the most accurate tilt and motion sensing possible. This unit is added to the car security system and exist along with the impact sensor that is already on the car security system.
- Tilt/Motion Sensor
- 1° or 3° Tilt Sensitivity
- Adjustable Motion Sensitivity: Off, Low, Medium, and High Settings
- Adjustable Arming Timer: 10 Seconds, or 2 Minutes
- Independently References Initial Vertical and Horizontal Inclination Each Time the Vehicle is Parked
|Glass Break Sensor
This sensor is used as an extra layer of defense, especially on vehicles with lots of windows or large windows. The glass break sensor detects the noise of breaking glass through a microphone with a sound discriminator that responds only to the shattering sounds of breaking glass. However, the impact sensor (described above) will also detect the physical impact of someone striking the window to break in. Therefor most alarms nowadays come standard with the impact sensor only. The glass break sensor is added as an extra layer of defense and protection to detect the sound of breaking glass.
|Strobe Light with Piezo Siren
This strobe light and siren is used iside the passeger compartment of the vehicle to attract atention and frighten off the theif. When the car alarm sounds, the strobe flashes and its own internal piezo siren shrieks a high pitched scream guaranteed to drive away anyone who tries to enter the inside of the car.Dual Strobe type flashing light, ear piercing 120db siren, body is constructed of red transparent plastic. Dimensions: 4.75″L, 2.75″W, 1.75″H
|Talking Alarm Sensor
This sensor package includes an exernal microwave radar sensor (not pictured here) with a special PA horn and talking module. Whenever the external proximity sensor detects movement near the sides of the vehicle, the talking module responds by saying “Protected by security system, step back”. This gives audible warnings before someone touches the vehcile. Also the talking module will announce “armed” or “disarmed” whenever the auto security system is turned on or off.
|Power Window Rollup Module
These modules allow your car alarm to automatically rollup windows when the auto secuity system is armed. The larger module will control either two windows in both directions (up and down) or four windows in one direction (up). For window roll down control, the host car alarm must have the necessary auxiliary output channel to accomodate this function
Pressure switch is used under a floor matt or inside a seat cushion to detect someone entering a vehicle or sitting down. Trips car alarm upon detecting pressure.
|Power Trunk Solenoid & Switch
What if you do not have a power trunk release but want one. In many cases we can add it for you by installing a power trunk release which includes an electric motor or solenoid installed in the trunk plus the pushbutton switch which is installed up front near the driver. Pushing the switch pops the trunk. The switch can be wired to be controlled remotely by the car alarm, keyless entry system, or remote car starter.
|Door Popper System
Door poppers do just that. They pop open your car doors when you unlock them. This system is used mostly on vehicles that have shaved door handles, where there is no other way to automatically open the doors. The poppers actually push the door open. The door popper system includes the spring loaded poppers, strong solenoid motors that pull the door lock mechanism to electromechanically unlock the doors, and a keyless entry system not pictured here that activates the solenoids individually via a pair of remote controls.
A backup battery give the auto security system backup power in case of loss of power. Examples: You leave your lights on in the car and your battery runs down. If someone brakes in, your alarm will not sound unless you have backup power. Or say a burglar deliberately targets your car battery somehow either damaging it or disconnecting it. With a car alarm backup battery your vehicle security system will still work, protecting your investment. The battery backup is connected only to the car alarm. It does not power the car. It is isolated from the vehicle’s main battery, but it is charged by the vehicle.
|Pin Switches & Magnetic Switches
Pin switches are used on doors, hood, trunk and any opening that can accommodate them. Often these ae optional switches added for additional protection of the vehicle. Sometimes the circumstances are such that a pin switch will not work. In many of these cases a magnetic switch can be used. This is essentially a magnet and a switch. When the magnet is moved away from the switch, the switch activates the car alarm and sounds a siren. Magnetic switches are often used for rear slider windows in pickup trucks, some camper shell doors, and any other opening where a pin switch won’t work.
Detects 15% movement of a trunk lid or hood as it is opened, as the tilt angle changes. Is used in situations where normal pin switches can not be installed. Trips car alarm when tilt degee change is detected.
The relay is used throughout the auto alarm system for many different functions. It is a building block that enables us to install many different features. Some of the most common are starter disable (preventing the vehicle from starting), keyless entry for locking and unlocking the doors, trunk release to pop open the trunk, or to add additional sirens to the security system.